**
** 一、安装 1、下载redis-5.0.3.tar.gz https://redis.io/download 2、上传到linux里面 put E\大数据软件\redis-5.0.3.tar.gz 3、解压（解压在module文件内） tur -zxvf redis-5.0.3.tar.gz -C/opt/module 4、编译 进入Redis的MakeFile脚本所在文件夹，执行make命令编译： cd redis-5.0.3 make 如果make命令提示缺少gcc，则安装： yum install gcc 在执行 make 如果出现错误： zmalloc.h:50:31: error: jemalloc/jemalloc.h: No such file or directory zmalloc.h:55:2: error: #error “Newer version of jemalloc required” make[1]: *** [adlist.o] Error 1 make[1]: Leaving directory `/data0/src/redis-2.6.2/src’ make: *** [all] Error 2 原因是jemalloc重载了Linux下的ANSI C的malloc和free函数。解决办法：make时添加参数： make MALLOC=libc make命令编译完成后，会出现一句提示： Hint: To run ‘make test’ is a good idea 即使不测试，通常也是可以使用的。但是如果执行make test ，会有如下提示： You need tcl 8.5 or newer in order to run the Redis test **make: *[test] Error_1 此时，需要安装TCL（Tool Command Language，工具脚本语言，是Linux内的一种语言包） yum install tcl 5、安装 继续Redis的安装工作，进入src文件夹，将Redis安装在指定目录下： cd src/ make install PREFIX=/opt/module/redis 6、配置文件 此时位于安装包解压路径的src文件夹下 mkdir /opt/module/redis/etc cd … cp redis.conf /opt/module/local/redis/etc 7、开启Redis （1）、立即启动Redis redis-server/opt/module/redis/etc/redis.conf 或 /opt/module/redis/bin/redis-server /opt/module/redis/etc/redis.conf
以上为默认的非守护进程开启Redis的方式，启动Redis后出现以下界面：
（2）设置Redis为后台启动 vim /opt/module/redis/etc/redis.conf 将daemonize no 改成daemonize yes ①Redis daemonize介绍 redis.conf配置文件中daemonize守护线程，默认是NO。 daemonize是用来指定redis是否要用守护线程的方式启动。 ②daemonize 设置yes或者no区别 daemonize:yes redis采用的是单进程多线程的模式。当redis.conf中选项daemonize设置成yes时，代表开启守护进程模式。在该模式下，redis会在后台运行，并将进程pid号写入至redis.conf选项pidfile设置的文件中，此时redis将一直运行，除非手动kill该进程。 daemonize:no 当daemonize选项设置成no时，当前界面将进入redis的命令行界面，exit强制退出或者关闭连接工具(putty,xshell等)都会导致redis进程退出。 ③redis.conf文件对daemonize的解释 By default Redis does not run as a daemon. Use ‘yes’ if you need it. Note that Redis will write a pid file in /var/run/redis.pid when daemonized. （3）、将Redis加入到开机启动 vim /etc/rc.local 加入一行： /opt/module/redis/bin/redis-server /opt/module/redis/etc/redis.conf 二、Redis可视化 1、安装RedisDesktopManager 下载RedisDesktopManager并安装： http://www.downza.cn/soft/210734.html 2、连接Redis服务器
如图，如果Test Connection连接不上，需要进行如下操作： （1）关闭防火墙 service iptables stop （2）解除绑定并关闭保护模式 vim /opt/module/redis/etc/redis.conf 注释掉bind 127.0.0.1所在行： #bind 127.0.0.1 将protected-mode yes改为protected-mode no
redis.conf文件对bind和protected-mode的解释： bind
By default, if no “bind” configuration directive is specified, Redis listens for connections from all the network interfaces available on the server. It is possible to listen to just one or multiple selected interfaces using the “bind” configuration directive, followed by one or more IP addresses. Examples: bind 192.168.1.100 10.0.0.1 bind 127.0.0.1 ::1 ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the internet, binding to all the interfaces is dangerous and will expose the instance to everybody on the internet. So by default we uncomment the following bind directive, that will force Redis to listen only into the IPv4 loopback interface address (this means Redis will be able to accept connections only from clients running into the same computer it is running).
IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES JUST COMMENT THE FOLLOWING LINE.
protected-mode Protected mode is a layer of security protection, in order to avoid that Redis instances left open on the internet are accessed and exploited. When protected mode is on and if: 1)The server is not binding explicitly to a set of addresses using the “bind” directive. 2) No password is configured. The server only accepts connections from clients connecting from the IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain sockets. By default protected mode is enabled. You should disable it only if you are sure you want clients from other hosts to connect to Redis even if no authentication is configured, nor a specific set of interfaces are explicitly listed using the “bind” directive.
3、在RedisManager中使用命令行 邮件Redis数据库连接，打开Console：
