环境,
多网卡, 多 bond 设备, 需要使用不同的工作方式, 如下:
eth0 eth1 -> bond0 -> mode 0 ( active-backup )
eth2, eth3 -> bond1 -> mode 1 (balance-rr)
参考:
[root@hh-yun-puppet-129021 kickstarts]# yum install -y kernel-doc
[root@hh-yun-puppet-129021 kickstarts]# rpm -ql kernel-doc | grep bonding.txt /usr/share/doc/kernel-doc-2.6.32/Documentation/networking/bonding.txt
其中该文档描述
/etc/modprobe.d/bond.conf 需要具有下面的配置
<pre class="plain" name="code">alias bond0 bonding options bond0 -o bond0 mode=balance-rr miimon=100 alias bond1 bonding options bond1 -o bond1 mode=balance-alb miimon=50但上述文档只能够针对 centos 5 或之前版本, 而文档也没有更新 centos 6, 7 下的方法
而 centos 6,7 将不可以使用 -o 参数进行参数定义, 另外, 假如把配置, 参数都写入 /etc/modprobe.d/bond.conf 如
alias bond0 bonding options bond0 mode=balance-rr miimon=100 alias bond1 bonding options bond1 mode=balance-alb miimon=50看上去 bond0, bond1 可以启动, 但从内核参数显示, 上述的设备只会使用相同的工作模式, 不满足不同 bond 设备使用不同模式方法
参考:
[root@hh-yun-compute-130026 ~]# grep Mode /proc/net/bonding/bond0 Bonding Mode: load balancing (round-robin) [root@hh-yun-compute-130026 ~]# grep Mode /proc/net/bonding/bond1 Bonding Mode: load balancing (round-robin)centos 6, 7 上正确配置方法:
/etc/modprobe.d/bond.conf
alias bond0 bonding alias bond1 bonding/etc/sysconfig/network-scripts/ifcfg-bond0
BONDING_OPTS='mode=1 miimon=100'/etc/sysconfig/network-scripts/ifcfg-bond1
BONDING_OPTS='mode=0 miimon=100'另: 注意, centos 7 下, 假如关闭 ipv6 模块使用, 那么 bond 模块也是无法正常使用的.
而 centos 7 已推荐使用 teamd 进行 bond 配置
teamd 与 bond 实现相同功能, 但新增不少新特性, 比较灵活, 相关信息自己看官方文旦
测试配置方法
[root@node147 network-scripts]# cat ifcfg-eth0 DEVICE="eth0" DEVICETYPE=TeamPort ONBOOT=yes TEAM_MASTER=team0 TEAM_PORT_CONFIG='{"prio": 100}' [root@node147 network-scripts]# cat ifcfg-eth1 DEVICE=eth1 DEVICETYPE=TeamPort ONBOOT=yes TEAM_MASTER=team0 TEAM_PORT_CONFIG='{"prio": 100}' [root@node147 network-scripts]# cat ifcfg-eth2 DEVICE="eth2" DEVICETYPE=TeamPort ONBOOT=yes TEAM_MASTER=team1 TEAM_PORT_CONFIG='{"prio": 100}' [root@node147 network-scripts]# cat ifcfg-eth3 DEVICE="eth3" DEVICETYPE=TeamPort ONBOOT=yes TEAM_MASTER=team1 TEAM_PORT_CONFIG='{"prio": 100}'team 配置与 mode 配置
[root@node147 network-scripts]# cat ifcfg-team0 DEVICE=team0 DEVICETYPE=Team ONBOOT=yes BOOTPROTO=none IPADDR=192.168.48.147 GATEWAY=192.168.48.1 PREFIX=24 TEAM_CONFIG='{"runner": {"name": "activebackup"}, "link_watch": {"name": "ethtool"}}' [root@node147 network-scripts]# cat ifcfg-team1 DEVICE=team1 DEVICETYPE=Team ONBOOT=yes BOOTPROTO=none IPADDR=10.0.0.147 PREFIX=24 TEAM_CONFIG='{"runner": {"name": "loadbalance"}, "link_watch": {"name": "ethtool"}}' 校验方法 [root@node147 network-scripts]# teamdctl -o -v team0 state dump {"ports": {"eth0": {"ifinfo": {"dev_addr": "00:50:56:81:7e:82", "dev_addr_len": 6, "ifindex": 2, "ifname": "eth0"}, "link": {"duplex": "full", "speed": 10000, "up": true}, "link_watches": {"list": {"link_watch_0": {"delay_down": 0, "delay_up": 0, "name": "ethtool", "up": true}}, "up": true}}, "eth1": {"ifinfo": {"dev_addr": "00:50:56:81:7e:82", "dev_addr_len": 6, "ifindex": 3, "ifname": "eth1"}, "link": {"duplex": "full", "speed": 10000, "up": true}, "link_watches": {"list": {"link_watch_0": {"delay_down": 0, "delay_up": 0, "name": "ethtool", "up": true}}, "up": true}}}, "runner": {"active_port": "eth0"}, "setup": {"daemonized": false, "dbus_enabled": true, "debug_level": 0, "kernel_team_mode_name": "activebackup", "pid": 3191, "pid_file": "/var/run/teamd/team0.pid", "runner_name": "activebackup", "zmq_enabled": false}, "team_device": {"ifinfo": {"dev_addr": "00:50:56:81:7e:82", "dev_addr_len": 6, "ifindex": 8, "ifname": "team0"}}} [root@node147 network-scripts]# teamdctl -o -v team1 state dump {"ports": {"eth2": {"ifinfo": {"dev_addr": "00:50:56:81:7c:e7", "dev_addr_len": 6, "ifindex": 4, "ifname": "eth2"}, "link": {"duplex": "full", "speed": 10000, "up": true}, "link_watches": {"list": {"link_watch_0": {"delay_down": 0, "delay_up": 0, "name": "ethtool", "up": true}}, "up": true}}, "eth3": {"ifinfo": {"dev_addr": "00:50:56:81:7c:e7", "dev_addr_len": 6, "ifindex": 5, "ifname": "eth3"}, "link": {"duplex": "full", "speed": 10000, "up": true}, "link_watches": {"list": {"link_watch_0": {"delay_down": 0, "delay_up": 0, "name": "ethtool", "up": true}}, "up": true}}}, "setup": {"daemonized": false, "dbus_enabled": true, "debug_level": 0, "kernel_team_mode_name": "loadbalance", "pid": 3419, "pid_file": "/var/run/teamd/team1.pid", "runner_name": "loadbalance", "zmq_enabled": false}, "team_device": {"ifinfo": {"dev_addr": "00:50:56:81:7c:e7", "dev_addr_len": 6, "ifindex": 9, "ifname": "team1"}}} 相关资源：python入门教程(PDF版)